Drilling Fleet and Facilities |
|
| TG operates out of our 18,000 SF facility located in W. Omaha near Interstate 80 with easy approach to any part of the state. The firm completes work throughout the Midwest and numerous other locations. | |
EQUIPMENT |
|
 |
CME-55 Drill Rig  CME-55 drill rig mounted on a Peterbilt Model 330 truck. 28,275 pounds (12,826 kg) of retract force and up to 9,842 foot pounds (13,346 Nm) of rotary torque. Capable of drilling holes up to 14 inches (36 cm) in diameter using hollow stem augers |
 |
CME-750X all-terrain drill rig The CME-750X is an all-terrain drill rig with a Cummins QSB 6.7L [409 cubic inch] 6 cylinder turbocharged diesel engine. U.S. EPA Tier 3 emissions certified. Ground bearing pressure is only 7.2 psi [.506 kgf/cm2] to 8.4 psi [.591 kgf/cm2]. |
 |
CME 75 Auto Hammer CME 75, Gas Over Diesel, Auto Hammer, 14,500 Ft-Lbs. Torque, 3L6 Moyno Pump, 23’ Mast, Auger and Rotary Boring, Drills to 200’. |
 |
CME 45B Auto Hammer 2 ea. CME 45B, Diesel Over Diesel, Four Wheel Drive, Auto Hammer, Auger and Rotary Boring, 20’ Mast, Drills to 130’. |
 |
Geoprobe Geoprobe® Model 6620DT, 66 in. (1676 mm) probe cylinder stroke; over 20 ton pulling capacity; built-in rotary spindle for concrete drilling, augering, and anchoring; turbo diesel engine. |
 |
|
||||||
|
|||||||
|
|
|||||||
 |
|||||||
|
|||||||
|
|||||||
